ES720.1 - User’s Guide68
Technical Data ETAS
8.5.4 Interface „USB“
Pin Assignment
The four USB ports on the front panel of the ES720.1 are standard USB sockets
of type A.
Output Current
Output current of each USB port 500 mA (max.)
Total of the output currents of the 4
US
B ports
1.2 A (max.)
Please refer to the notes in chapter "Maximum Output Current" on page 25
and "Overload and Emergency-Off" on page 25.
External Storage Expansions
File system FAT32 required
Number of partitions 1
Preinstalled software and other data on the USB storage medium must be
uninstalled or removed before using it on the ES720.1.
Recommended USB Sticks as Storage Expansion
When using USB sticks, please refer to the technical data and environmental
conditions supplied by the manufacturer. You could restrict the operating
range of the ES720.1
The function "Storage expansion of the ES720.1" was tested w
ith USB sticks of
the following product family (see table).
Possible data loss!
Do not disconnect the USB storage medium from the ES720.1 during
the data transfer.
To Next Page
Loading...