ES720.1 - User’s Guide40
Getting Started ETAS
5.2.3 “7-29V” Port
To connect the ES720.1 module with the power supply, you require the CBP120
cable or the CBP1205 cable provided.
To connect the ES720.1 with the power supply
• Connect the cable CBP120 or the cable CBP1205
for the power supply with the
„7-29V“ port of the
ES720.1.
• Connect the supply voltage pins of the cable with
the required power supply.
Note the color coding of the connectors.
Note the current consumption of the ES720.1 and
its supply voltage range. The admissible values are
listed in section
8.5.2 on page 66.
Dangerous electrical voltage!
Connect the power cable only with a suitable vehicle battery or with
a suitable lab power supply! The connection to power outlets is not
allowed!
To prevent an inadvertent insertion in power outlets, ETAS recom-
mends to equip the power cables with safety banana plugs CBP1205
in areas with power outlets.
To Next Page
Loading...