Unison Station User Manual 17
To find and select a desired control page
1. If the LCD faceplate is dark, touch the screen to turn on the backlight
.
2. Read the labels on the page tabs. If you see the tab for your desired page,
go to step 4.
3. To display the next set of page tabs touch either of the stacks. If you see
your desired page, go to step 4. If not, touch the stack again to display
another set of five tabs until you see your desired page. You can scroll
back and forth through the page tabs by touching the stacks on either side.
4. Select your desired page by touching its page tab. The desired control
page will appear.
The next five pages in the manual describe how to use the three standard LCD
control pages.
▼
Preset pages – Let you recall, record and adjust Presets.
▼
Zone pages – Let you adjust individual light zone intensities.
▼
Wall pages – Let you inform Unison of the current status of movable
partitions that divide rooms into smaller sections.
Custom pages provide customized combinations of all the available controls.
The appearance of a custom page will vary according to its function.
To Next Page
Loading...
