26 Electronic Theatre Controls, Inc.
Cleaning control station faceplates
All control faceplates (except the LCD control)
Control station faceplates, with the exception of the LCD touchscreen, can be
cleaned with ammonia-based glass and hard surface cleansers. Do not use
abrasive cleansers.
1. Dampen a soft clean cloth with cleanser. Do not spray cleanser directly on
the control faceplate.
2. Clean the faceplate with the cloth.
LCD control faceplate (including touchscreen)
LCD control stations should be cleaned with clean absorbent cotton cloth,
moistened with water or alcohol only. Do not use detergent, abrasives, or
ammonia-based cleaners.
1. Dampen the cloth with alcohol or water only. Do not spray alcohol or water
directly on the control faceplate.
2. Clean the faceplate and touchscreen with the cloth.
To Next Page
Loading...
