34 Electronic Theatre Controls, Inc.
E
Event
A Preset or macro activation.
F
Fade Time
Fade time is the set interval for light zone intensity levels to change when a
Preset is activated.
Fader
A fader is a sliding control that allows you to raise or lower levels. LCD station
faders are represented by bar graph symbols.
Fader Station
A Fader station uses linear potentiometers (sliders) as well as buttons to
control light zone intensities.
I
Intensity
The brightness or output level of fixtures in a light zone.
L
LCD Station)
The Unison LCD control station controls lighting with a high resolution
touchscreen LCD to display buttons, sliders and other control images.
Light Manager
The Unison configuration program. It is used to create and edit Unison
configurations, including writing macros and programming time clock events.
Light zone
One or more light fixtures that are controlled together.
M
Macro
A macro is a recorded set of commands programmed to play back at a
scheduled time or activated by a control station.
Master fader
A master fader proportionally raises or lowers multiple light zone intensities.
P
Preset Recall station
A Preset Recall station controls light zone intensities by recalling and adjusting
Presets using button input.
Preset
A Preset is a recorded set of light zone intensities, including a programmed
fade time (default is one second).
Preset button
A Preset button is a button or LCD symbol that recalls an assigned Preset
when activated.
To Next Page
Loading...
