EasyManua.ls Logo

Eternus DX60 - Page 221

Eternus DX60
241 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Specifications
> A.1 Device Specifications
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
221
Copyright 2010 FUJITSU LIMITED
P3AM-3042-07ENZ0
*1: Physical capacity is calculated based on the assumption 1TB=1,000
4
Byte, 1GB=1,000
3
Byte.
*2: Logical capacity is calculated based on the assumption 1TB=1,024
4
Byte and being formatted in the
recommended RAID5 configuration. The possible capacity for use depends on the environment
conditions.
*3: When 120 of 2.5" disk are installed.
*4: Up to five SSDs can be installed in the single controller model, and up to nine SSDs can be installed in
the dual controller model.
*5: Can be installed in 3.5" type drive enclosures.
*6: Value for a single controller enclosure.
Maximum heat generation
AC 100 –
120V
13,536kJ/h 7,812kJ/h (*3)
AC 200 –
240V
13,464kJ/h 7,596kJ/h (*3)
Environmental
conditions
Temperature 5 – 40°C (operating)
Humidity 20 – 80%RH (operating)
Noise
emission
Sound Power Level
(LWAd) (*6)
5.9B 6.0B
Sound Pressure Level
(LpAm) (*6)
42.0dB(A) 43.5dB(A)
Item
3.5" disk model 2.5" disk model
Single-
controller
model
Dual-
controller
model
Single-
controller
model
Dual-
controller
model

Table of Contents