Eternus DX60 - Page 84

Chapter 4 Flow from Installation to Operation
>
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
84
Copyright 2010 FUJITSU LIMITED
P3AM-3042-07ENZ0
Basic Setup
Start GUI from the Web browser of the connected PC, and perform the basic setup of the
ETERNUS DX60/DX80/DX90.
(1)
Initial Setup
Perform device initial setup.
• Set Date and Time
• Set Storage System Name
• Change Password
• Modify the FC Port Mode (only for ETERNUS DX90)
• Port Parameter Settings
• Setup Network Environment
Refer
"7.2.1 Initial Setup" (page 140)
(2)
Configuration Wizard
Perform the settings necessary for device operation.
• Create RAID Group
• Create Volume
• Define Host
• Configure Affinity Group
• Define LUN Mapping
Refer
"7.2.2 Configuration Wizard" (page 149)
(3)
Assigning Hot Spares
To add hot spares, register them.
Refer
"7.2.3 Hot Spare Registration" (page 160)