Eton VECTOR ST 250 - Maintenance Schedule

7
2.2 MAINTENANCE SCHEDULE
The internal maintenance in the following table is based on average riding, normal conditions.
Riding in unusually dusty areas, require more frequent servicing.
300KM Every
1000KM
Every
3000KM
Every
6000 KM
Every
12000KM
Notes
1 Month 3 Months 6 Months 1 Year 2 Years
Fuel Lines I I R
Throttle Operation I I
Air Filter I C R
Fuel Filter R
Spark Plug I I R
Drive Chain I, L Lubricate for every 1 month
Brake Shoes I
Brake System I I
Brake Fluid I R
Nuts, Bolts & Fasteners I
WHEEL/TIRES I I
Wheels I I
Steering System I I
Suspension System I I
C.V.T Drive belt I R
Transmission Oil R Replace for every 3,000km or 6 Months
Engine Oil R Replace for every 3,000km or 6 Months
Battery I I,C I,C
Oil Filter (Screen) C C
Valve Clearance I I
Coolant I I R
Cooling Fan I I
Carburetor (Idle Speed) I I
Choke I
Note – I: Inspect and Clean, Adjust, Lubricate or Replace, if necessary
C: Clean L: Lubricate R: Replace
2.3 FUEL TUBE
Inspect the fuel lines for deterioration, damaging or
leakage and replace if necessary.