Evco c-pro 3 Series User Manual

EVCO S.p.A. c-pro 3 | Hardware manual ver. 2.0 | Code 114CP3E204
page 49 of 86
Networks /
UART2
(1)
Timeout 2 240 s 10
Modbus communication time-out in a
RS-485 network wired on the RS-485 port
for the test of the remote values of the I / O
(after this time without Modbus
communication, the request is considered
not sent and the controller moves to the
following request) (1)
-32768 32767 - - - 0
value of the password to gain access to
level 1
Password Level 1:
- - - - - - - - - ON
enabling the password to gain access to
level 1
OFF = to gain access to level 1 one
has not to set any password
ON = to gain access to level 1 one
has to set a password
-32768 32767 - - - 0
value of the password to gain access to
level 2
Password Level 2:
- - - - - - - - - ON
enabling the password to gain access to
level 2
OFF = to gain access to level 2 one
has not to set any password
ON = to gain access to level 2 one
has to set a password
-32768 32767 - - - 0
value of the password to gain access to
level 3
Password Level 3:
- - - - - - - - - ON
enabling the password to gain access to
level 3
OFF = to gain access to level 3 one
has not to set any password
ON = to gain access to level 3 one
has to set a password
-32768 32767 - - - 0
value of the password to gain access to
level 4
Password Level 4:
- - - - - - - - - ON
enabling the password to gain access to
level 4
OFF = to gain access to level 4 one
has not to set any password
ON = to gain access to level 4 one
has to set a password

Evco c-pro 3 Series Specifications

General

Brand	Evco
Model	c-pro 3 Series
Category	Controller
Language	English