14
Priming (continued)
WINTERIZING THE PUMP
To prepare the pump for freezing temperatures:
□ Shut off power to the pump.
□ Relieve system pressure. Open a faucet and let it drain until water stops owing.
□ Drain the pump. Your pump may have a separate drain plug. Remove this plug and let it drain.
□ Your pump may only have a plug or connection on the side of the pump. Remove this and let the pump drain.
Some water will remain in the pump. Leave the plug out until you are ready to re-prime.
Specications
PERFORMANCE
SKU Hp
GPM of Water @ Total Discharge Pressure of 40 Psi
Maximum
Pressure
0 ft. 5 ft. 10 ft. 15 ft. 20 ft. 25 ft.
1011677535 1/2 11.5 10.3 9.1 6.7 6.1 5.5 64 Psi
1011677537 3/4 14.7 13.6 11.8 10.5 9.6 8.7 67 Psi
1011677533 1/2 15.1 14.1 11.8 9.6 7.8 5.6 63 Psi
1011677534 3/4 19.2 18.4 17.6 15.7 13.5 10.1 68 Psi
Powers supply 115V/230V, 60 Hz., 20/15 Amp Circuit
Liquid temp. range 32°F to 95°F (0°C - 35°C)
Discharge size 1 in. FNPT
Suction size 1-1/4 in. FNPT
Water level 25 ft.
To Next Page
Loading...
