2
Table of Contents
Safety Information ....................................2
Warranty ............................................3
Retain Original Purchase Receipt For Warranty Eligibility .....3
Two (2) Year Limited Warranty - SKU #1011677533 & 1011677534
One (1) Year Limited Warranty - SKU #1011677535 & 1011677537
.3
Pre-Installation .......................................4
Application .........................................4
Tools Required ......................................4
Package Contents ...................................4
Determine The Depth Of Your Well .......................5
Location Of The Pump ................................5
Tanks - Pre-Charged Storage ...........................5
Materials Required (Not Included) .......................5
Installation ..........................................6
Shallow Well Jet Pump Installations .....................6
Replacing An Old Pump ...............................6
Well Point (Driven Point) Installation .....................7
Cased Well Installation, 2 In. Or Larger Casing .............8
Installation For Surface Water ..........................9
Discharge Pipe And Pressure Tank Connections ...........10
Pre-Charge Tank Connection ..........................10
Standard Tank Connection ............................11
Pressure Switch Assembly Instructions ..................12
Voltage Setting .....................................12
Priming ............................................13
Winterizing The Pump ...............................14
Specifications .......................................14
Performance ......................................14
Troubleshooting .....................................15
Safety Information
DANGER: Do not pump ammable or explosive liquids
such as oil, gasoline, kerosene, ethanol, etc. Do not use
in the presence of ammable or explosive vapors. Using
this pump with or near ammable liquids can cause an
explosion or re, resulting in property damage, serious
personal injury, and/or death.
DANGER: ALWAYS disconnect the power to the pump
before servicing.
DANGER: Do not touch the motor housing during
operation. The motor is designed to operate at high
temperatures. Do not disassemble the motor housing.
DANGER: Do not handle the pump or pump motor with
wet hands or when standing on a wet or damp surface, or
in water.
WARNING: Wear safety goggles at all times when
working with pumps.
WARNING: This is a dual voltage 115V/230V pump.
VOLTAGE SELECTOR INSIDE PRESET TO 230V.
For 115V selection, please open the terminal cover and
set the switch to the proper voltage. All wiring should be
performed by a qualied electrician.
WARNING: Protect the electrical cord from sharp objects,
hot surfaces, oil, and chemicals. Avoid kinking the cord.
Do not use damaged or worn cords.
WARNING: Failure to comply with the instruction and
designed operation of this unit may void the warranty.
ATTEMPTING TO USE A DAMAGED PUMP can result in
property damage, serious personal injury, and/or death.
WARNING: The pump should be connected to a
230V/115V GFCI outlet protected with a 10 amp (230V)/20
amp (115V) fuse or circuit breaker.
CAUTION: Know the pump and its applications,
limitations, and potential hazards.
CAUTION: Secure the pump to a solid base.
CAUTION: Periodically inspect the pump and system
components. Disconnect the pump from the power supply
before inspecting.
CAUTION: Follow all local and National Electrical Codes
(NEC), state and local building codes, and all Occupational
Safety and Health Administration (OSHA) guidelines.
IMPORTANT: The motor of this pump has a thermal
protector that will trip if the motor becomes too hot. The
protector will reset itself once the motor cools down and an
acceptable temperature has been reached. The pump may
start unexpectedly if it is plugged in.
IMPORTANT: Ensure the electrical power source is
adequate for the requirements of the pump.
IMPORTANT: This pump is made of high-strength,
corrosion-resistant materials. It will provide trouble-free
service for a long time when properly installed, maintained,
and used. However, inadequate electrical power to the
pump, dirt, or debris may cause the pump to fail. Please
carefully read the manual and follow the instructions
regarding common pump problems and remedies.
To Next Page
Loading...
