91
Raw Water System
Cleaning the Seakeeper Pump Strainer
Periodically clean the Seakeeper pump sea strainer
using the following procedure.
• Turn o the Seakeeper and deactivate the Sea-
keeper circuit breaker.
• Close the valve at the intake seacock.
• Turn the strainer bowl counterclockwise to re-
move it and remove the screen.
• Thoroughly ush the screen and the inside of the
strainer bowl to remove foreign matter.
• Lubricate the O-ring lightly with silicon or Tef-
lon grease and reinstall the strainer bowl.
• Reassemble the strainer making sure that the
bowl is tight.
• Open the intake valve, activate the Seakeeper
and check for leaks and proper water ow.
Seakeeper System Sea Strainer
To Next Page
Loading...
