Eversys Enigma E'2c/Classic - Page 108

Number Module /
Unit
Info Message Explanations / Remedies
S-000 Display /
Touch
screen
Initialise, please
wait...
Wait until the initialisation
has nished.
- -
S-001 Hydraulic
module
Coee boiler is
heating...
Wait until the coee boiler
has reached its nominal
temperature.
- -
S-002 Bean
hopper
Cameo: Bean
hopper left
missing.
Enigma /
Shotmaster /
E'line: Bean
hopper rear
missing.
Check if the bean hopper or
lid is inserted correctly.
- -
S-003 Bean
hopper
Cameo: Bean
hopper right
missing.
Enigma /
Shotmaster /
E'line: Bean
hopper front
missing.
Check if the bean hopper or
lid is inserted correctly.
- -
S-004 Grounds
drawer
Please empty
the grounds
drawer.
The grounds drawer must be
emptied before the cleaning
can be started (page 67).
- -
S-005 Grounds
drawer
Risk of injury!
Please empty
the grounds
drawer carefully.
The grounds
drawer was
lled with hot
water during
cleaning.
During the cleaning the
grounds drawer is lled with
water.
Empty and clean the grounds
drawer (page 67).
- -
S-006 Grounds
drawer
Grounds drawer
is full.
Empty and clean the grounds
drawer (page 67).
- -
S-007 Grounds
drawer
Please insert the
grounds drawer.
Empty and clean the grounds
drawer (page 67).
- -
S-008 Grounds
drawer
Please insert the
grounds drawer.
The coee machine can
only continue if the grounds
drawer is inserted.
- -
S-009 Grounds
drawer
Grounds drawer
missing.
The sensor has detected that
the grounds drawer is missing.
- -
Troubleshooting
© Eversys S.A. Page 108 of 172 02.01.2023