Eversys Enigma E'2c/Classic - 5.2. Machine Switching and Standby Mode

5.2. Switch on a machine
Enigma | Shotmaster (standard | large drip tray)
1. Move the coee outlet (1) all the up and remove the grounds drawer (2).
2. Start the machine at the main power (3), switch to «1» or «I» (ON).
3. Check that the main water inlet tap is open (4).
4. Put the grounds drawer back to its original position.
Open
Close
4
3
2
1
Enigma | Shotmaster (large drip tray with pitcher rinser)
1. Move the coee outlet (1) all the up and remove the grounds drawer (2).
2. Start the machine at the main power (3), switch to «1» or «I» (ON).
3. Check that the main water inlet tap is open (4).
4. Check that the pitcher rinser water inlet tap is open (5).
5. Put the grounds drawer back to its original position.
Open
Close
5 4
3
2
1
Operation
© Eversys S.A. Page 58 of 172 02.01.2023