Eversys Enigma E'2c/Classic - Clean the Steam Wand | Steam Arm; Clean the Steam Nozzle

Short version
• Clean the 1.5-Step | milk arm with a clean cloth daily or as required.
7.4.5. Clean the steam wand | steam arm
After every use of the steam wand (steam arm) it is necessary to wipe and purge it.
1. Press the blinking purge button on the main screen (1).
2. Wipe the steam wand with a damp cloth (2). Change cloths every day.
3. On the screen that displays, press purge (3).
2
1
3
7.4.6. Clean the steam nozzle
Depending on machine model and options, this feature may not be available. For
more information, contact your service organisation.
Only necessary to clean the nozzle monthly or if required.
Care
© Eversys S.A. Page 100 of 172 02.01.2023