Eversys Enigma E'2c/Classic - Operation; 5.1. Daily Setup and Startup Procedures

5. Operation
This chapter presents how to start, stop and operate the machine.
It is imperative to read the General Safety Instructions (page 10) and understand
this manual before making drinks with this machine. In case of unclear information,
please contact your local service organisation.
The quality of the coee depends on many factors, but it is most important of all to
use fresh coee beans and to regularly clean and service your machine according to
Cleaning and maintenance operations (page 81).
Depending on machine model and options, features describe in this chapter may not
be available. For more information, contact your service organisation.
The display of products and buttons depends on the settings.
Illustrations show software V3.17.
Illustrations show monochrome style.
5.1. Daily setup guidelines
The quality of the coee depends on many factors, but it is most important of all to
use fresh coee beans and to regularly clean and service your machine according to
Cleaning and maintenance operations (page 81).
1. Switch on (page 58) at the main power switch.
• Or wake up (page 59) with the standby button.
2. If necessary, acknowledge errors (see Error message example (page 102)).
3. Press Rinse (page 59) to initialise startup.
4. Press Steam purge button (page 61) to initialise startup (machine option).
5. Empty and clean the grounds drawer (page 67).
6. Fill with fresh coee bean (page 61).
7. Fill the powder containers (machine option) (page 62).
8. Fill the cups storing surface (page 63).
9. If necessary, ll with coee cleaning balls (page 86).
10. Enjoy your drink!
Operation
02.01.2023 Page 57 of 172 © Eversys S.A.