Eversys Enigma E'2c/Classic - 7.4. Model-Specific Cleaning Procedures

1. Remove the feet covers (1) (machine option).
2. Clean beneath the machine.
The height available under the machine (h) is greater than 76 mm in compliance
with the standards in force.
3. Put the feet covers back to their original position (machine option).
1
1
h
1
7.4. Cleaning procedures (depending on the model and options
of the machine)
7.4.1. Clean the grounds bin drawer (machine option)
Depending on machine model and options, this feature may not be available. For
more information, contact your service organisation.
Care
02.01.2023 Page 97 of 172 © Eversys S.A.