Eversys Enigma E'2c/Classic - Steam Wand Is Clogged; Cups on the Cup Heater Are Not Warm Enough

8.6.4. Steam wand is clogged
• The steam wand needs to be purged before and after every product preparation (page 61).
Not using the purge will slowly block the pipe inside. Make purging your regular
procedure or refer to Steam purge button (page 61).
8.6.5. Cups on the cup heater are not warm enough
• Cups can be topped up to a maximum of 2 layers to have an eective cup heating function.
• The cup heater is not intended to keep cups warm in a cold air ow (e.g. near an open window or
door).
• Contact your service engineer to verify the heating panel settings.
Troubleshooting
02.01.2023 Page 129 of 172 © Eversys S.A.