Eversys Enigma E'2c/Classic - Water Specifications of Shotmaster Machines; Environmental Conditions for Coffee Machines

If the pressure exceeds 4 bars (58 psi), it is necessary to install a pressure reducer.
Water quality recommendation
Description E'2c | E'2s | E'2ms | E'4s | E'4ms | E'4s x-wide | E'4ms
x-wide | E'6s | E'6ms
Carbonate hardness max. 6° dKH (107 ppm)
pH value ideal 7.0 - 7.2
Total hardness 5 - 8° dGH (89-142 ppm)
2.3.8. Water specications of Shotmaster machines
Technical data
Description Shotmaster c Shotmaster s |
Shotmaster ms
Shotmaster s-pro |
Shotmaster ms-pro
Inlet hose 1 x inox braided pipe
G3/8" female x 2 m
1 x inox braided pipe
G3/8" female x 2 m
2 x inox braided pipe
G3/8" female x 2 m
Drain hose 1 x Hose (Ø 22 mm x Ø 16
mm x 2 m)
1 x Hose (Ø 22 mm x Ø 16
mm x 2 m)
1 x Hose (Ø 22 mm x Ø 16
mm x 2 m)
Flow rate > 150 L/h > 200 L/h > 200 L/h (left hand side)
> 150 L/h (right hand
side)
Pressure 2.5 - 4 bars (36.3 - 58
psi)
2.5 - 4 bars (36.3 - 58
psi)
2.5 - 4 bars (36.3 - 58
psi)
If the pressure exceeds 4 bars (58 psi), it is necessary to install a pressure reducer.
Water quality recommendation
Description Shotmaster c | Shotmaster s | Shotmaster ms | Shotmaster s-pro |
Shotmaster ms-pro
Carbonate hardness max. 6° dKH (107 ppm)
pH value ideal 7.0 - 7.2
Total hardness 5 - 8° dGH (89-142 ppm)
2.3.9. Environmental conditions for coee machines
Do not use the machine outside of the dened ranges of environmental conditions.
Description
02.01.2023 Page 45 of 172 © Eversys S.A.