Eversys Enigma E'2c/Classic - 5.3. Rinsing Functions

5.2.1. Standby (wake up)
Standby mode switches o all the functions like heating the boiler, the touch screen
and the front lighting to save energy. It is possible to use this function to switch o,
for instance overnight. Power usage is less than 2W.
If the machine is already switched on and in standby mode, press and hold (3s) the standby button
(1) to power up.
1
5.3. Rinse
The Rinse button dispenses hot water.
To Initialise the coee machine, it is necessary to rinse after each startup. Each time a rinse is
necessary this button will ash.
It is possible to rinse at any time by pressing the Rinse (1) button.
Depending on settings, the Rinse button will display either in the products area or on
the Top layer (page 50). Refer to User rights in the Display menu (page 163).
Operation
02.01.2023 Page 59 of 172 © Eversys S.A.