Eversys Enigma E'2c/Classic - Switch off a Machine

5.11. Switch o a machine
Enigma | Shotmaster (standard | large drip tray)
1. Move the coee outlet (1) all the up and remove the grounds drawer (2).
2. Shut down the machine at the main power (3), switch to «0» (OFF).
3. Empty the grounds drawer, clean and dry it.
4. On specic conditions (e.g. long term storage, actions on water pump ...), close the main water
inlet tap (4).
5. Put the grounds drawer back to its original position.
Open
Close
4
3
2
1
Enigma | Shotmaster (large drip tray with pitcher rinser)
1. Move the coee outlet (1) all the up and remove the grounds drawer (2).
2. Shut down the machine at the main power (3), switch to «0» (OFF).
3. Empty the grounds drawer, clean and dry it.
4. On specic conditions (e.g. long term storage, actions on water pump ...), close both water inlet
tap (4) and (5).
5. Put the grounds drawer back to its original position.
Open
Close
5 4
3
2
1
Operation
© Eversys S.A. Page 68 of 172 02.01.2023