Eversys Enigma E'2c/Classic - Dispense a Single Coffee Product; Dispense a Double Coffee Product; Dispense a Hot Water Product

5.8.2. Dispense a single coee product
All product buttons function as start/stop buttons.
Press the button to start dispensing the product and, if necessary, to stop dispensing
manually: press the same product button again.
1. Adjust the coee spout height (page 63).
2. Place a cup under the coee outlet.
3. Press one of the single coee products available (e.g. Espresso).
4. Wait for the product to dispense.
5.8.3. Dispense a double coee product
All product buttons function as start/stop buttons.
Press the button to start dispensing the product and, if necessary, to stop dispensing
manually: press the same product button again.
1. Adjust the coee spout height (page 63).
2. Place two cups under the coee outlet.
3. Press one of the double coee products available (e.g. 2x Espresso).
4. Wait for the product to dispense.
5.8.4. Dispense a hot water product
Depending on machine settings and outputs available, the hot water product will
be dispensed through the coee outlet and/or the hot water outlet. For more
information, contact your service organisation.
All product buttons function as start/stop buttons.
Press the button to start dispensing the product and, if necessary, to stop dispensing
manually: press the same product button again.
1. Adjust the coee spout height (page 63).
2. Place a cup under the coee outlet or the hot water outlet.
3. Press the hot water product.
4. Wait for the product to dispense.
Operation
© Eversys S.A. Page 64 of 172 02.01.2023