Eversys Enigma E'2c/Classic - Refill and Visual Check of the Coffee Cleaning Balls Dispenser; Automatic System Cleaning Procedure with Everclean on Enigma | Shotmaster Machines and Accessories (Milk and Choco Module Included)

7.3.1. Rell and visual check of the coee cleaning balls dispenser
IRRITANT PRODUCTS
Everclean and Eversys cleaning ball should be considered potentially dangerous.
When performing any operation on the machine, local safety regulations must be
followed. It is imperative to wear protective gloves and glasses when working with
potentially dangerous materials.
It is imperative to switch o the machine before carrying any operation on the
cleaning balls dispenser. There is a risk of minor injury with moving parts.
1. Switch o (page 68) at the main power switch.
2. Remove the lid (1) and check that there are no blocked or broken cleaning balls in the dispenser
(3).
3. If necessary, clean the dispenser and remove the blocked or broken cleaning balls.
4. Rell with coee cleaning balls (2).
Make sure that there are no broken cleaning ball.
5. Put the lid back to its original position.
1
3
2
7.3.2. Automatic system cleaning procedure with Everclean on Enigma |
Shotmaster machines and accessories (milk and choco module included)
It is possible to run the complete cleaning procedure at any time. Though you must run the cleaning
when requested (if cancelled and depending on settings, it will not be possible to make a drink unless
cleaning is performed).
DO NOT REMOVE THE MILK TUBES FROM THE MILK TANK before requested on the
screen. The milk in the tube will be pushed back.
Care
© Eversys S.A. Page 86 of 172 02.01.2023