Eversys Enigma E'2c/Classic - Dispense a Product with Steam; Dispense a Powder Coffee Product (Speciality Coffee) (Machine Option)

5.8.5. Dispense a product with steam
All product buttons function as start/stop buttons.
Press the button to start dispensing the product and, if necessary, to stop dispensing
manually: press the same product button again.
Never leave the steam wand immersed in the pitcher if not used.
1. Before using the steam wand, press the purge button (page 61) to evacuate air from possible
condensation.
2. Insert the steam wand in the milk frothing pitcher (lled to one third with fresh cold milk).
3. Press one of the steam buttons to dispense a steam product (e.g. to make milk foam or coee
art).
4. Wait for the product to dispense.
5. Purge and wipe the steam wand (page 61).
1
5.8.6. Dispense a powder coee product (speciality coee) (machine
option)
Only add ground coee in the powder chute!
All product buttons function as start/stop buttons.
Press the button to start dispensing the product and, if necessary, to stop dispensing
manually: press the same product button again.
The display of products and buttons depends on the settings.
Depending on machine settings and outputs available, the hot water product will
be dispensed through the coee outlet and/or the hot water outlet. For more
information, contact your service organisation.
Depending on settings, the speciality coee button may not be displayed in the
products area. For more information, refer to User rights in the Display menu (page
163).
Operation
02.01.2023 Page 65 of 172 © Eversys S.A.