Eversys Enigma E'2c/Classic - Page 169

Parameter Default User
(Passwor
d
protected
)
Super
user
Advanced
user
More
information
Name Bean Hopper Rear
(Grinder Left)
Rear - - Contact service
organisation.
Name Bean Hopper Front
(Grinder Right)
Front - - Contact service
organisation.
PQC - Powder Quantity
Control
On - - Contact service
organisation.
Grinding Capacity Bean
Hopper Rear [mm/s]
5,50 - - Contact service
organisation.
Grinding Capacity Bean
Hopper Front [mm/s]
5,50 - - Contact service
organisation.
ETC - Extraction Time
Control Rear
O - - Contact service
organisation.
ETC - Extraction Time
Control Front
O - - Contact service
organisation.
Levelling Yes - - Contact service
organisation.
Grinding Speed Standard - - Contact service
organisation.
ETC Conguration sub-
menu
(if one of the ETC is
activated (ON))
- - - Contact service
organisation.
Grinder
Adjustment (page 167) sub-
menu
(standard view for the user
and super user)
- - - Contact service
organisation.
Appendix
02.01.2023 Page 169 of 172 © Eversys S.A.