About this Manual
2 Safety
2.2 Important Safety Instructions
WARNING!
This document does not replace and is not intended to replace any
local, state, provincial, including without limitation applicable in the
jurisdiction of installation. EVERVOLT assumes no responsibility for
the compliance or non-compliance with such laws or codes in
connection with the installation of the product.
Before installing or using the product, read all the instructions,
cautions, and warnings in this manual. Failure to do so or to follow
any of the instructions or warnings in this document can result in
electrical shock, serious injury or death, or may damage the
product.
Before connecting the product to the electrical utility grid, contact
the local utility company.
All work must be carried out by a qualified electrician. Children
should be supervised to ensure that they do not play with the
appliance.
Safety
DANGER!
Danger to life due to high voltages in the product!
Ÿ Whole home backup solution
Up to 4 EVERVOLT Hybrid Inverters parallel
Up to 4 battery modules stackable per inverter
Homeowners are automatically provided with backup power in the
event of grid interruption to whole home loads.
Ÿ Partial home backup solution
Up to 4 EVERVOLT Hybrid Inverters parallel
Up to 4 battery modules stackable per inverter
Homeowners are automatically provided with backup power in the
event of grid interruption to selected loads.
1.4.2 Solutions
5
4
This manual contains important instructions for EVERVOLT Hybrid Inverter
that should be followed during installation and maintenance for the
inverter.
2.1 General Safety Instructions
EVERVOLT Hybrid Inverter is designed and tested to meet all applicable
North American safety standards. However, like all electrical and electronic
equipment, safety precautions must be observed and followed during installation
and operation of the EVERVOLT Hybrid Inverter to reduce the risk of personal
injury and to ensure a safe installation.
Installation, commissioning, service, and maintenance of EVERVOLT Hybrid
Inverter must only be performed by certified installer that are licensed and /
or satisfy state and local jurisdiction regulations.
Before starting installation or commissioning, read the entire manual carefully to
ensure correct and safe installation or commissioning. And keep the user manual
in a safe place.
All US electrical installations must comply and be in accordance with all the state,
local, utility regulations, and National Electrical Code ANSI/NFPA 70.
To Next Page
Loading...