IONPURE
®
MX CEDI Modules
Page 2 of 32 IP-MAN-MX-Rev E
TABLE OF CONTENTS
DISCLAIMER STATEMENT 4
PROPRIETARY RIGHTS STATEMENT 4
OPERATING MANUAL REVISION HISTORY 5
1. INTRODUCTION 6
1.1. MX Module Overview 6
1.2. Using This Manual 6
1.3. Installation Precautions 7
1.4. Operating Precautions 7
1.5. Shutdown Precautions 8
2. PRE-INSTALLATION: PREPARATION & REQUIREMENTS 9
2.1. Tools and Equipment 9
2.2. Electrical and Plumbing Connection Requirements 9
2.3. Inspect the Module 9
2.4. Operating Requirements 9
2.5. Flow Rates and Pressure Drops 11
3. MX MODULE INSTALLATION 12
3.1. Moving the MX Module Into Place 12
3.2. Connect Plumbing Fittings 12
3.3. Electrical Connections 13
4. PREPARATION FOR STARTUP 14
4.1. Verify Quality Meets MX Feed Water Requirements 14
4.2. Estimate DC Current Required 14
5. START-UP PROCEDURE 15
5.1. Test Interlocks 15
To Next Page
Loading...
