IONPURE
®
MX CEDI Modules
Page 6 of 32 IP-MAN-MX-Rev E
1. INTRODUCTION
1.1. MX Module Overview
MX modules use ion exchange resins, ion exchange membranes and a DC potential to
produce high purity deionized water without the need for chemical regeneration. Their
compact state-of-the-art design assures ease of installation, maintenance, and service.
MX modules are available in the following sizes:
Model Nominal Flow Description
IP-MX030 30 LPH (0.13 GPM) 2 cell-pair CEDI module with vessel
IP-MX060 60 LPH (0.26 GPM) 4 cell-pair CEDI module with vessel
IP-MX125 125 LPH (0.55 GPM) 8 cell-pair CEDI module with vessel
IP-MX250 250 LPH (1.1 GPM) 16 cell-pair CEDI module with vessel
IP-MX500 500 LPH (2.2 GPM) 32 cell-pair CEDI module with vessel
For more information on the MX module specifications and flow rates, see Sections 2.3
and 2.4 and Appendix A of this Manual.
Figure 1-1: View of MX module ends (cathode end on left, anode end on right)
1.2. Using This Manual
• Service technicians should review this manual prior to going to the site. It lists tools
and materials needed to install the modules. It also outlines the site information
required to prepare for installation.
To Next Page
Loading...
Need help?
General
