IONPURE
®
MX CEDI Modules
Page 22 of 32 IP-MAN-MX-Rev E
Table 6-5 Sodium percarbonate (1%) – mix sodium carbonate & hydrogen peroxide
IP-MX30 IP-MX60 IP-MX125 IP-MX250 IP-MX500
Water
0.3 gal
(1.1 L)
0.6 gal
(2.3 L)
1.2 gal
(4.5 L)
2.4 gal
(9.1 L)
4.8 gal
(18.2 L)
Na
2
CO
3,
solid
0.025 lbs
(0.011 kg)
0.05 lbs
(0.023 kg)
0. 10 lbs
(0.045 kg)
0.20 lbs
(0.09 kg)
0.40 lbs
(0.18 kg)
H
2
O
2,
30%
0.006 gal
(24 mL)
0.013 gal
(51 mL)
0.026 gal
(99 mL)
0.053 gal
(200 mL)
0.106 gal
(400 mL)
Best use: for sanitization and biofilm removal
NOTE: must be preceded by salt flush and water rinse
Table 6-6 Peracetic acid, 0.04% (100:1 dilution)
IP-MX30 IP-MX60 IP-MX125 IP-MX250 IP-MX500
Water
0.3 gal
(1.1 L)
0.6 gal
(2.3 L)
1.2 gal
(4.5 L)
2.4 gal
(9.1 L)
4.8 gal
(18.2 L)
Peracetic
acid
0.003 gal
(0.011 L)
0.006 gal
(0.023 L)
0.012 gal
(0.045 L)
0.024 gal
(0.091 L)
0.048 gal
(0.182 L)
Best for disinfection/bacteria control (not very effective for biofilm removal)
NOTE: [1] Quantity based on Minncare: 20% Hydrogen Peroxide & 4% peracetic acid.
[2] Dilute 120:1 for Oxonia P3
[3] Must be preceded by salt flush and water rinse
Table 6-7 Sodium hydroxide (2%)
IP-MX30 IP-MX60 IP-MX125 IP-MX250 IP-MX500
Water 0.53 gal
(2.0 L)
1.1 gal
(4.0 L)
2.1 gal
(8.0 L)
4.2 gal
(16.0 L)
8.5 gal
(32.0 L)
NaOH
pellets
0.092 lbs
(0.042 kg)
0.185 lbs
(0.084kg)
0.370 lbs
(0.168 kg)
0.739 lbs
(0.336 kg)
1.461 lbs
(0.664 kg)
or 50%
NaOH
0.014 gal
(55 mL)
0.029
(110 mL)
0.058 gal
(220 mL)
0.116 gal
(439 mL)
0.229
(868 mL)
Table 6-8 Water for initial post-cleaning flush
IP-MX30 IP-MX60 IP-MX125 IP-MX250 IP-MX500
Water
0.53 gal
(2.0 L)
1.1 gal
(4.0 L)
2.1 gal
(8.0 L)
4.2 gal
(16.0 L)
8.5 gal
(32.0 L)
To Next Page
Loading...
Need help?
General
