Excell Counting Scale - Pre-Set Quantity Conditions; M+ Operation

EXCELL PRECISION CO., LTD.
Counting ZSME200000003
22
3-3 PRE-SET QUANTITY CONDITIONS
Press Z then 1 followed by 3
Weight Unit Weight Quantity
.
X
Press 0 or 1 to select the required mode
0 = The quantity will be accepted by the scale only when the weight is stable.
1 = The quantity will be accepted by the scale even if the weight is un-stable.
To exit and save the entry, press the • key
3-4 M+ OPERATION
Press Z then 1 followed by 4
Weight Unit Weight Quantity
X
Press 0 or 1 to select the required mode
0 = M+ will be operate when the weight is stable.
1 = M+ will be operate even when the weight is un-stable.
To exit and save the entry, press the • key