EXCELL PRECISION CO., LTD.
Counting ZSME200000003
37
5-2 PRESET TARE OPERATION CONDITIONS
ΠPress the
Z
key until the unit weight displays then press
1
WEIGHT UNIT WEIGHT QUANTITY
- - - - -
- - - - - -
WEIGHT UNIT WEIGHT QUANTITY
• Press the
2
key.
WEIGHT UNIT WEIGHT QUANTITY
X
Use the number keys 0 or 1 key to select 0 or 1
0 ⇒ Preset tare is not allowed if there is a weight on the scale.
1 ⇒ Preset tare will operate at any point throughout the weighing range.
Press the . key to exit the setting mode and the scale will return to counting mode.
To Next Page
Loading...
