EXCELL PRECISION CO., LTD.
Counting ZSME200000003
36
CHAPTER 5 INTERFACE
4 Function available for RS232 or PRINTER output, please refer to section 7 and 8
below.
5-1 TOTALISING
ΠPress the
Z
key until the unit weight displays followed by
pressing key
1
WEIGHT UNIT WEIGHT QUANTITY
- - - - -
- - - - - -
WEIGHT UNIT WEIGHT QUANTITY
• Press the
1
key.
WEIGHT UNIT WEIGHT QUANTITY
X
Use the number 0 , 1 or 2 key to select 0, 1, or 2
0 ⇒ Press
M+
key and the window display will show the totalised value.
After 3 seconds, the scale will return to counting mode.
1 ⇒ Press
M+
key and the window display will show the totalised value.
Press
CE
key and the scale will return to counting mode.
2 ⇒ Press
M+
key and the display window will not show the totalised
value as the buzzer will beep.
Press the . key to exit the setting mode and the scale will return to counting mode.
To Next Page
Loading...
Need help?
General
