Excell Counting Scale - Transmit Mode Selection

EXCELL PRECISION CO., LTD.
Counting ZSME200000003
43
5-8 TRANSMIT MODE SELECTION
ΠPress the Z key until the unit weight displays then press 1
WEIGHT UNIT WEIGHT QUANTITY
- - - - - - - - - - -
WEIGHT UNIT WEIGHT QUANTITY
• Press the 8 key.
WEIGHT UNIT WEIGHT QUANTITY
X
Use the number keys 0 to 3 to select
0 ⇒ Press M+ key to transmit 2 ⇒ Stable transmit
1 ⇒ Stream transmit 3 ⇒ EZ-2 printer only
Once the setting is done, re-start the scale by turning the power off / on.
Press the . key to exit the setting mode and the scale will return to counting mode.
4 The weight must be greater than a positive value to transmit the record
information.
4 Transmit mode data:
Press M+ key to transmit
NO.
N/W
U/W
PCS
Stream transmit / Stable transmit
N/W
U/W
PCS
Press MC key to transmit ( clear the totalised data from memory )
===========
T/N
T/W
T/A