EXCELL PRECISION CO., LTD.
Counting ZSME200000003
39
5-4 TOTALISING OPERATION CONDITIONS
ΠPress the
Z
key until the unit weight displays then press
1
WEIGHT UNIT WEIGHT QUANTITY
- - - - -
- - - - - -
WEIGHT UNIT WEIGHT QUANTITY
• Press the
4
key.
WEIGHT UNIT WEIGHT QUANTITY
X
Use the number keys 0 or 1 to select 0 or 1
0 ⇒ Totalising will only be carried out when the weight is stable.
1 ⇒ Totalising will be carried out irrespective of the stability of the weight.
Press the . key to exit the setting mode and the scale will return to counting mode.
To Next Page
Loading...
