Excell Counting Scale - The Condition to Allow the Next Totalising Operation

EXCELL PRECISION CO., LTD.
Counting ZSME200000003
40
5-5 THE CONDITION TO ALLOW THE NEXT
TOTALISING OPERATION
ΠPress the Z key until the unit weight displays then press 1
WEIGHT UNIT WEIGHT QUANTITY
- - - - - - - - - - -
WEIGHT UNIT WEIGHT QUANTITY
• Press the 5 key.
WEIGHT UNIT WEIGHT QUANTITY
X
Use the number keys 0 or 1 to select 0 or 1
0 ⇒ The weight needs to return to zero before the next totalising operation is
allowed.
1 ⇒ Allow next totalising operation without return to zero interlock.
Press the . key to exit the setting mode and the scale will return to counting mode.