Excell NC RACER EX-2001 - CHAPTER 8 MAINTENANCE; 8-1 Reset All Parameters; 8-2 Reset General Function Parameters; 8-3 Self-Diagnosis Mode

EX-2001 NC RACER ZSME300000091
38
EXCELL PRECISION CO., LTD.
CHAPTER 8 MAINTENANCE
8-1 RESET ALL PARAMETERS BACK TO DEFAULT
(1) Switch the capacity calibration switch to “ON”, press and hold keys
together when the indicator is in the self-testing sequence.
(2) The display shows . .
(3) Press and hold the key until the display shows . Switch the calibration
switch to “OFF”.
8-2 RESET GENERAL FUNCTION PARAMETERS BACK TO
DEFAULT
(1) When the indicator reset back to zero, press and hold keys.
The indicator is in the self-testing sequence.
(2) The display shows . .
(3) Press and hold the key until the indicator resets.
8-3 SELF-DIAGNOSIS MODE
(1) When the indicator reset back to zero, press and hold keys.
The indicator is in the self-testing sequence.
(2) When the display shows
, it means the indicator is already in the Self-diagnosis
mode.
(3) Press and keys to select a diagnosis item. Press the key to enter
the selected item for diagnosis and press to exit.
F n
ENTER
ENTER
F n
ENTER
ENTER
STANDBY
OPERAE
ENTER
ZERO
+
TARE
—
ENTER
STANDBY
OPERAE