Excell NC RACER EX-2001 - CHAPTER 6 ANIMAL SCALE FUNCTION SETTING

EX-2001 NC RACER ZSME300000091
19
EXCELL PRECISION CO., LTD.
5-4 PASSWORD SETTING
Set the calibration switch to ON position.
Press key
Press key
Press key
Set the new password
* Enter “0 000” to skip password
setting.
Confirm the password (re-enter
the password again)
 Once the password is set, whenever users access to the calibration mode or
the other function settings, the display shows
After I sec.
,
and users need to enter the password. If the password is incorrect,
. is
displayed.
 Please contact your supplier if forgetting the password.
ZERO
+
ENTER
ENTER
⇒ Increase the number of
the flashing digit by one
⇒ Decrease the number
of the flashing digit by
one
⇒ Shift the flashing digit
one space to left
⇒ Shift the flashing digit
one space to right
⇒ Save the settings
⇒ Exit the settings
TARE
—
PRINT
ZERO
+
GROSS
NET
ENTER
STANDBY
OPERAE