Turntable control SmartTurn
Safety
Dok-ID:EXPERT-0003-EN-2011 9
2 Safety
This section provides an overview of all the important safety
aspects for optimal protection of personnel, as well as for safe and
trouble-free operation.
Significant hazards can occur if the handling instructions and
safety instructions in this manual are not complied with.
Pos: 2.2 / S martT ur n/2_ _Mo ntag e- u nd B etri ebs anl eit ung- D reht is che beac ht en @ 1\mod_1219047563353_38.doc @ 6887
Comply with the instructions in the
Installation and Operating Manual -
Turntables
DANGER!
Danger of severe or fatal injuries!
Therefore:
– Strictly ensure that you have read the
Installation and Operating Manual - Turntables
NOTE!
The safety instructions in the Installation and
Operating manual - Turntables, and in the technical
documentation must be strictly complied with.
The turntable controller is included as a component
in the scope of delivery of a turntable.
Pos: 2.3 / St and ard modul e/------Sei ten umbr uch-------- @ 0\ mod_1192536092524_38.doc @ 116
Pos : 2. 4 /S mart Tur n/ 2._V era ntw ortu ng des B etr eib ers @ 1 \mod_1219046166750_38.doc @ 6854
2.1 Responsibility of the customer
The device is used in industrial applications. Consequently the
owner of the device is subject to legal industrial safety obligations.
In addition, the customer is responsible to ensure that the system
is always in technically faultless condition.
Compliance with the instructions in the operating manual is the
prerequisite for trouble-free operation and the fulfillment of possible
guarantee claims.
The operating manual contains important service instructions
therefore it must be kept in a safe location.
To Next Page
Loading...