ExRobotics B.V.
ExR-2 Robot
Operating Guide
Document No.:
20220412IP1
Version No.: 3
This document is considered an uncontrolled copy when printed. Always ensure that you print and use a current version.
Copyright 2023 ExRobotics B.V.
9.3. Replacing Tracks
The longevity of the tracks will vary based on the terrain and routes the robot traverses. However,
under normal conditions, the tracks should last for at least 50 kilometres. To ensure the robot's
anti-static performance is maintained, ExRobotics will supply replacement tracks.
9.3.1. Preparations
Beam (at least 90x40x50mm)
Allen keys 4 & 5 mm metric
Names and location of parts:
9.3.2. Preparing the Robot
▪ Move the robot to an area with a flat surface and get a small container to
collect and organize the screws
▪ Turn off the robot
NOTE: It’s crucial to follow the instructions carefully to maintain the robot's optimal
performance. If you encounter any difficulties or have questions during the track
replacement process, contact ExRobotics for assistance.
To Next Page
Loading...