Extron electronics IN1804 Series - Outputs Panel; Firmware Panel

IN1804 Seamless Scaling Switchers • Internal Web Pages 99
Outputs Panel
The Outputs panel (see figure 49,
5
, on page 94) displays the resolution and refresh rate
of the outputs, their signal type, and the HDCP status of all connected outputs.
The following status symbols may be displayed for connected outputs:
Symbol Definition
The display is HDCP compliant.
The display is not HDCP compliant, or no signal is being received from
the connected display.
No Display
No display is connected.
Firmware Panel
The Firmware panel (
6
) displays the current firmware version and the date it was last
updated. You can also update the firmware on your IN1804 from this panel (firmware files
can be downloaded from www.extron.com, see Downloading Updated Firmware on
page 103).
To update firmware:
1. In the Firmware panel, click the Select File button.
2. In the Open dialog box, browse to locate the new firmware file on your computer (by
default the file is stored at C:\Program Files (x86)\Extron\Firmware\IN1804 after
being downloaded from the Extron web page).
NOTE: Firmware files for IN1804 have a .eff extension. Do not attempt to load any
other file types.
3. Double-click the firmware file name. The Open window closes, and the selected
firmware file name appears in the Update Firmware panel on the web page (see
figure 56,
1
).
Figure 56. Firmware Update Dialog Box with a Firmware File Selected
4. Click Update to begin (
3
). (If you want to cancel the update, click the x (
2
) at the
right of the name.)
56