Extron electronics IN1804 Series - SIS Overview; Using the Command and Response Tables; Symbol Definitions

IN1804 Seamless Scaling Switchers • SIS Configuration and Control 51
SIS Overview
Using the Command and Response Tables
The Command and Response Tables for SIS commands, beginning on page 60, lists
the commands that the switcher recognizes as valid, the responses that are returned to the
host, a description of the command function or the results of executing the command, and
examples of commands in ASCII (Telnet).
ASCII to Hex Conversion Table
•
Space
Figure 34. ASCII to Hexadecimal Character Conversion Table
Symbol Definitions
NOTE: Upper- and lowercase text can be used interchangeably unless otherwise stated.
•
= Space
]
= Carriage return with line feed
}
= Carriage return with no line feed
|
=
Pipe (can be used interchangeably with the } character)
E
= Escape
W
=
Can be used interchangeably with the E character
34