Extron electronics IN1804 Series - Command and Response Tables for IN1804 SIS Commands

IN1804 Seamless Scaling Switchers • SIS Configuration and Control 60
Command and Response Tables for IN1804 SIS Commands
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Input Configuration
Input Selection
Select input
X!
! In
X!
•All
]
Select input
X!
.
View current input
!
X!]
View the current input.
Input Video Format
View detected input format
X!
*\
X#]
Verbose modes 2 and 3:
Vtyp
X!
*
X#]
View video format
X#
of input
X!
.
Input Name
Write input name
EX!
,
X1$
NI
}
Nmi
X!
,
X1$]
Set name
X1$
for input
X!
.
View input name
EX!
NI
}
X1$]
View name
X1$
assigned to input
X!
.
Input EDID
Specify an EDID value
E
A
X!
*
X2!
EDID
}
EdidA
X!
*
X2!]
Assign EDID
X2!
to input
X!
.
View assigned EDID
E
A
X!
EDID
}
X2!]
View EDID
X2!
for input
X!
.
Save the output EDID to a
custom slot
E
S
X@
*
X2!
EDID
}
EdidS
X@
*
X2!]
Save the EDID of output
X@
to
X2!
.
NOTE: For this command,
X2!
can
be 201 through 205 only.
View EDID native resolution
E
N
X2!
EDID
}
nnnnxnnnn•@nn.nnHz
Verbose modes 2 and 3:
Show the resolution and refresh rate of
EDID
X2!
.
EdidN
X2!
* nnnnxnnnn•@nn.nnHz
Example:
EdidN013*1280x768 @59.87Hz
Export EDID file
E
E
X2!
,<filename>EDID
}
EdidE
X2!]
Export EDID
X2!
to <filename>.
Import EDID file
E
I
X2!
,<filename>EDID
}
Import EDID
X2!
from <filename>.
EdidI
X2!]
NOTES:
• For the Import EDID file command,
X2!
can be 201 through 205 only.
• <Filename> can optionally be a full path name. The EDID file format is .bin, with 128 or 256 bytes of binary data.
• Exporting a default EDID (
X2!
value of 10 through 76) results in HDMI with LPCM-2Ch audio EDID being exported.
KEY:
X!
= Input selection
1 = DisplayPort input 1 (all models)
2 = HDMI or DVI input 2 (all models)
3 = HDMI or DVI input 3 (all models)
4 = HDMI or DVI (standard and DO), TP (DI and DI/DO)
X@
= Output
1 = TP Output 1A (IN1804 DO and DI/DO)
HDMI output 1A (IN1804 and IN1804 DI)
2 = HDMI output 1B
X#
= Input digital video format (view only)
0 = No input signal detected, 1 = DVI, 2 = HDMI, 3 = DisplayPort
X1$
= Input name (text label)
Can contain up to 32 characters, excluding , (comma) ,*, and
|
.
X2!
= EDID emulation
See the input EDID table on page 53.