IN1804 Seamless Scaling Switchers • Installation 9
Installation
This section contains information on how to connect cables to the IN1804 models. Topics in
this section include:
• Installation Overview
• Rear Panel Connections
• Connection Details
Installation Overview
1. Turn off or disconnect all related equipment. Ensure that video sources and output
displays are all turned off and disconnected from the power source.
2. Mount the switcher (see Mounting on page 102).
3. Connect input sources (see Rear Panel Connections on page 10).
4. Connect output devices (see Rear Panel Connections).
5. Connect desired control devices (see Rear Panel Connections).
6. (Optional) Connect contact closure and tally indicator devices and any needed Show
Me cables (see Wiring the Contact/Tally Connectors on page 19).
7. Connect a power source to the switcher (see AC power connector on page 11).
8. Configure the switcher using any of the following methods:
• Front panel menus (see Operation beginning on page 21)
• PCS (see Configuration Software beginning on page 82 to download the
software, and see the IN1804 Series PCS Help File to configure the system)
• SIS commands (see SIS Configuration and Control, beginning on page 48)
To Next Page
Loading...
