Extron electronics IN1804 Series - TCP;IP Panel

IN1804 Seamless Scaling Switchers • Configuration Software 85
3. Finalize the settings in one of the following ways:
• Click the Apply button to accept the changes and return to the Device
Discovery panel.
• Click the Apply and Connect button to accept the changes and connect to the
selected device. A new device configuration tab opens.
• Click the Cancel button to cancel any pending changes and return to the Device
Discovery panel.
TCP/IP Panel
The TCP/IP panel connects PCS to a specific device through Ethernet.
Figure 38. TCP/IP Panel
1. Click the TCP/IP tab (see figure 38,
1
).
2. In the IP Address field (
2
), enter the IP address of the desired device.
3. If required, enter the device password in the Password field (
3
).
NOTES:
• The factory configured passwords for all accounts on this device have been set to
the device serial number. Passwords are case sensitive.
• Select the Show Characters checkbox (
5
) to display the password characters.
4. In the Telnet Port field (
4
), enter the Telnet port of the desired device.
5. Click the Connect button (
6
). A new device tab opens.
38