IN1804 Seamless Scaling Switchers • SIS Configuration and Control 52
X!
= Input selection — 1 through 4
1 = DisplayPort input 1 (all models)
2 = HDMI or DVI input 2 (all models)
3 = HDMI or DVI input 3 (all models)
4 = HDMI or DVI input 4 (IN1804 standard, and
IN1804 DO)
TP (IN1804 DI and DI/DO)
X@
= Output connector
1 = TP Output 1A (IN1804 DO and DI/DO)
HDMI output 1A (IN1804 and IN1804 DI)
2 = HDMI output 1B
X#
= Digital video format
0 = No signal
1 = DVI
2 = HDMI
3 = DisplayPort
X^
= Total lines Response is four digits, padded with zeros.
X&
= Total pixels Response is four digits, padded with zeros.
X*
= Active lines Response is four digits, padded with zeros.
X(
= Active pixels Response is four digits, padded with zeros.
X1)
= Enable or disable
0 = Off or disabled
1 = On or enabled
X1@
= Internal temperature In degrees Celsius. Response is two digits, padded with
a zero.
X1#
= Horizontal and vertical
frequencies
nnn.nn Response is three digits with two decimal
places, padded with zeros. (Example: 075.32)
X1$
= Text label
Up to 32 characters but cannot contain , * or
|
.
NOTES:
• Input presets saved without a name are given the default name INPUT PRESET nnn. The
default logo name is Logo nn (for example, Logo 05)
• Entering a single space in the field repopulates it with the default name.
X1%
= Picture adjustment
0-127 (default = 64)
X1^
= Horizontal and vertical position
(shift)
Horizontal: -4096 through +4096
Vertical: -2160 through +2160
• The response is five digits, padded with zeros and
preceded by + or –.
• The logo vertical position allows up to ± 2400.
X1&
= Horizontal and vertical size
Horizontal = 10 to 8192
Vertical = 10 to 4320
The response is five digits, padded with zeros.
X2)
= EDID file 128 or 256 bytes of binary data
To Next Page
Loading...
