Extron electronics IN1804 Series - Page 38

IN1804 Seamless Scaling Switchers • Operation 30
• INn:EDID — Press the navigation buttons to select an EDID for the active input. Select
a discrete EDID from a list of factory-supplied EDID or select Auto to use the current
output resolution and refresh rate. The Input EDID Resolutions table below lists the
available EDID selections, including their SIS command variable numbers (see the Input
EDID commands on page 60 for information on the SIS commands).
Input EDID Resolutions
Input EDID
Resolution 23.98 Hz 24 Hz 25 Hz 29.97 Hz 30 Hz 50 Hz 59.94 Hz 60 Hz
640x480
10
800x600
11
1024x768
12
1280x768
13
1280x800
14
1280x1024
15
1360x768
16
1366x768
17
1440x900
18
1400x1050
19
1600x900
20
1680x1050
21
1600x1200
22
1920x1200
23
480p
24 25
576p
26
720p
29 30 31 32 33 34
1080i
35 36 37
1080p
38 39 40 41 42 43 44 45**
2048x1080 (2K)
46 47 48 49 50 51 52 53
2048x1200
54
2048x1536
55
2560x1080
56
2560x1440
57
2560x1600
58
3840x2160
59 60 61 62 63 64*** 65*** 66***
4096x2160*****
69 70 71 73 73 74**** 75**** 76****
Automatic*
0* — Match current switcher output resolution
Output 1A HDMI
1 (EDID export only)
Output 1B HDMI
2 (EDID export only)
Custom EDIDs
201 through 205
*Default input EDID
**Default output resolution
***Rate supported only with 4:2:0 color sampling for IN1804 twisted pair models when in DTP, XTP, or
HDBT mode. 4:4:4 sampling is available via HDMI outputs or DTP2 endpoints only.
****Rate available only with 4:2:0 color sampling when using any twisted pair output. 4:4:4 sampling is
available via HDMI outputs only.
*****4096x2160 rates are available only for output resolution and cannot be selected for input EDID.