Extron electronics IN1804 Series - Page 81

IN1804 Seamless Scaling Switchers • SIS Configuration and Control 73
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Audio Configuration (continued)
Configure Playback
Set file-to-slot association
E
A
X8)
,<lename>CPLY
}
Assign a file to slot
X8)
. <filename>
can include an optional path.
CplyA
X8)
,<lename>
]
NOTES:
• <lename> must include the full path name if the file is not in the /Audio directory.
• The file name must include the extension. Example: song123.mp3.
• If the file is not in the /Audio directory, a / must be included in front of the name to indicate it is in the root directory.
Example: /song123.mp3.
Clear file-to slot-association
E
A
X8)
,•CPLY
}
CplyA
X8)
,•
]
Remove audio file from slot
X8)
.
View file-to-slot association
E
A
X8)
CPLY
}
<lename>
]
View the audio file in slot
X8)
.
Set repeat mode
E
M
X8)
*
X8#
CPLY
}
CplyM
X8)
*
X8#]
Set the audio playback repeat mode for
slot
X8)
to
X8#
.
View repeat mode
E
M
X8)
CPLY
} X8#]
View the repeat mode set for slot
X8)
.
Set delay
E
D
X8)
*
X8$
CPLY
}
CplyD
X8)
*
X8$]
Set the number of seconds the IN1804
waits before repeating playback of the
file in slot
X8)
.
View delay
E
D
X8)
CPLY
} X8$]
View number of seconds delay
X8$
set
for slot
X8)
.
Write name
E
N
X8)
*
X1$
CPLY
}
CplyN
X8)
*
X1$]
Assign name
X1$
to the file in slot
X8)
.
NOTE: Saving a file name as a single space repopulates the field with the default name.
View name
E
N
X8)
CPLY
} X1$]
View the name assigned to the file in
slot
X8)
.
Set file playback volume
E
V
X5)
CPLY
}
CplyV
X5)]
Set global minimum playback volume
level
X5)
.
View file play back volume
E
VCPLY
} X5)]
View the current global minimum volume
level.
NOTE: If the master output volume V setting (see the Volume commands on the previous page) does not match the file
playback level, the volume adjusts to the CplyV setting during playback. It returns to the previous program audio volume
and mute settings when playback completes.
KEY:
X1$
= Playback text label
Up to 32 characters, excluding , (comma) ,*, and
|
.
X5)
= Audio output volume
-100 to 0 in 1 dB steps. Default = -10 dB.
X8)
= Playback slot number
1 through 16
Highest priority for playback is slot 1, descending to lowest priority 16.
X8#
= Repeat play
0 = No repeat, 1 = Repeat
X8$
= Playback delay
Number of seconds to wait before repeating playback on the current
audio file, if repeat has been enabled.
1 through 300 (1-300 seconds delay between repeats).
0 = No delay