FAAC DAAB MT - Safety and Handling; General Safety Warnings

INSTRUCTION MANUAL MT, MA2, MK2, M10 DRIVE UNIT
4
Safety
• General
Read through the entire instruction manual carefully before unpacking, installing and using the equipment. Pay particular
attention to the safety paragraphs in the text.
ere is a risk of serious injury or material damage if the prescribed precautionary measures are not taken.
Sections of text warning of hazards are sorted by severity and have the headings DANGER, WARNING and NOTE! which
have the following signicance:
!
DANGER
is means that there is a danger to the life or health of the user if
the relevant precaution is not taken.
!
WARNING
is means that there is a risk of bodily injury or damage to the
machine if the relevant precaution is not taken.
• NOTE!
is means that important information requires the full attention of the reader.
Packing, transport and unpacking
• General
NOTE!
It is important to secure the drive unit properly in its packaging and to ensure that
moving parts are not under tension during transport.
Immediately on arrival check that the consignment is as agreed.
!
WARNING
Treat the drive unit carefully during handling and transport.
Lifting the drive unit
!
WARNING
Do not lift the drive unit by its moving parts or protective cover.
Table of weights excluding the drive arm and link arm:
Drive unit MT MA2 MK2 M10
Weight, kg
16 23 25 60