Installation manual
CNC 8035
4.
MACHINE PARAMETERS
Spindle parameters
(SOFT M: V15.3X)
(S
OFT T: V16.3X)
·150·
DECINPUT (P31)
Indicates whether or not the spindle has a home switch to synchronize the spindle when working
in M19.
REFPULSE (P32)
Indicates the type of marker pulse Io to synchronize the spindle when working in M19.
REFDIREC (P33)
Indicates the rotating direction when synchronizing the spindle during M19.
REFEED1 (P34)
Indicates the spindle’s positioning speed when in M19 and the synchronizing speed until it finds the
home switch.
REFEED2 (P35)
Indicates the synchronizing speed of the spindle after hitting the home switch and until it finds the
marker pulse.
REFVALUE (P36)
Indicates the position value assigned to the reference point of the spindle (home or marker pulse).
Value Meaning
NO It has no home switch.
YES It has a home switch.
Default value: YES
Value Meaning
+ sign Positive pulse (5 V).
- sign Negative pulse (0 V).
Default value: + sign
Value Meaning
+ sign Positive direction.
- sign Negative direction.
Default value: + sign
Possible values
Between 0.0001 degrees/min and 99999.9999 degrees/min.
Default value: 9000 degrees/min.
Possible values
Between 0.0001 degrees/min and 99999.9999 degrees/min.
Default value: 360 degrees/min.
Possible values
Within ±99999.9999 degrees.
Default value: 0
To Next Page
Loading...
