Installation manual
CNC 8035
C.
APPENDIX
Summary of internal CNC variables.
(SOFT M: V15.3X)
(S
OFT T: V16.3X)
·434·
Position related variables.
Variables related to the following error.
PLC related variables.
Variables associated with local and global parameters.
Operating-mode related variables.
Other variables.
POSS R R R Real Spindle position.
Reading from the PLC in ten-thousandths of a degree (within ±999999999)
and from the CNC in degrees (within ±99999.9999).
RPOSS R R R Real Spindle position.
Reading from the PLC in ten-thousandths of a degree (between 0 and
3600000) and from the CNC in degrees (between 0 and 360).
TPOSS R R R Theoretical spindle position.
Reading from the PLC in ten-thousandths of a degree (within ±999999999)
and from the CNC in degrees (within ±99999.9999).
RTPOSS R R R Theoretical spindle position.
Reading from the PLC in ten-thousandths of a degree (between 0 and
3600000) and from the CNC in degrees (between 0 and 360).
PRGSP R R R Position programmed in M19 via program for the main spindle.
FLWES R R R Spindle following error.
Variable CNC PLC DNC
PLCMSG R - R Number of the active PLC message with the highest priority.
PLCIn R/W - - 32 PLC inputs starting from (n).
PLCOn R/W - - 32 PLC outputs starting from (n).
PLCMn R/W - - 32 PLC marks starting from (n).
PLCRn R/W - - (n) Register.
PLCTn R/W - - Indicated (n) Timer’s count.
PLCCn R/W - - Indicated (n) Counter’s count.
PLCMMn R/W - - Modifies the (n) mark of the PLC.
Variable CNC PLC DNC
( section 11.10 )
GUP n - R/W - Global parameter (P100-P299) (n), user parameter (P1000-P1255) (n),
OEM parameter (P2000-P2255) (n).
LUP (a,b) - R/W - Indicated local (P0-P25) parameter (b) of the nesting level (a).
CALLP R - - Indicates which local parameters have been defined by means of a PCALL
or MCALL instruction (calling a subroutine).
Variable CNC PLC DNC
( section 11.11 )
OPMODE R R R Operating mode.
Variable CNC PLC DNC
( section 11.12 )
NBTOOL R - R Number of the tool being managed..
PRGN R R R Number of the program in execution.
BLKN R R R Label number of the last executed block.
GSn R - - Status of the indicated G function (n).
GGSA - R R Status of functions G00 thru G24.
GGSB - R R Status of functions G25 thru G49.
GGSC - R R Status of functions G50 thru G74.
GGSD - R R Status of functions G75 thru G99.
GGSE - R R Status of functions G100 thru G124.
GGSF - R R Status of functions G125 thru G149.
GGSG - R R Status of functions G150 thru G174.
GGSH - R R Status of functions G175 thru G199.
GGSI - R R Status of functions G200 thru G224.
GGSJ - R R Status of functions G225 thru G249.
GGSK - R R Status of functions G250 thru G274.
GGSL - R R Status of functions G275 thru G299.
GGSM - R R Status of functions G300 thru G320.
MSn R - - Status of the indicated M function (n)
GMS - - R Status of M functions: M (0..6, 8, 9, 19, 30, 41..44).
PLANE R R R Abscissa and ordinate axes of the active plane.
To Next Page
Loading...
